EasyClean10 Glass Treatment: Backed by the Power of 10!

Congratulations on your purchase of EasyClean10 Glass Protection. To register and activate your 10-year warranty, please complete the form below. This information is strictly for use by EasyClean10, and will not be given or sold to any other party.


 
  

 
CARE INSTRUCTIONS
To clean glass coated with EasyClean10, rinse regularly with water, and squeegee dry after each use. To keep your glass looking new, it needs to be cleaned each week using a damp microfiber cloth and a mild liquid dish soap to remove soap scum, dirt, and grime from the glass.

For areas with hard water or minerals a buildup may occur on the coating. Mix a solution of white vinegar & water (1 part vinegar to 3 parts water) and spray it on the affected area. Allowing this to soak on the glass for several minutes will dissolve the built up minerals. If build up has been allowed to accrue for some time, repeat as necessary and/or apply undiluted vinegar.

Never use polishing compounds, abrasive, harsh, rough, gritty, highly alkali, highly acidic, powder, or paste cleaners on EasyClean10 treated glass!


WARRANTY INFORMATION
EasyClean10 makes cleaning easier and faster by creating a true water & oil repellent surface. PCT Global LLC warrants that EasyClean10 will remain water repellent (bead angle of greater than 70 degrees) for a period of 10 years from the date of the receipt provided by your dealer.

CONDITIONS
EasyClean10 must have been applied by a factory-trained technician (or representative) and maintained as per the care instructions to validate the warranty. Any warranty claim requires the end consumer to have registered the warranty within a reasonable time after installation, be in possession of the original label, and possess the original invoice stating EasyClean10 application, and date of installation.

WARRANTY QUESTIONS or CLAIMS
If, within the warranty period and meeting the above conditions, you feel your glass is no longer water repellant, please send an email to serviceusa@enduroshield.com and provide a brief explanation of the problem along with your Name, Address, Date of Installation, Telephone Number, and Warranty Code.

PCT Global LLC reserves the right to inspect the glass to determine application of the coating and correct maintenance in accordance with the manufacturer's instructions. If it is determined that a treated area is no longer water repellant, PCT Global LLC will gladly provide replacement EasyClean10 in an amount determined to be adequate to re-coat the unprotected area.

Note: This warranty does not cover any glass or hardware, but only the EasyClean10 coating.
Care Agreement